Home
Heating load/heating surfaces
Heating load
Cross-trade
Change of manufacturer
Performs the change of manufacturer in the heating load trade

Heating load/heating surfaces
- Heating load
  - Display heating load / heating and cooling surface design
    Displays the heating load / heating and cooling surface design
  - Insert drawing reference
    Inserts a drawing reference
  - Tapping components
    Tapping various components in the drawing
  - Components
  - Set room symbol
    Sets a room symbol
  - Record room geometry
    Captures all components and symbols belonging to the heating load for a room geometry
  - Assign U-values
    Assigns a defined U-value to horizontal components
  - Create floors
    Create floors
  - Create ceilings/roofs
    Create ceilings/roofs
  - Creating ceilings/roofs and floors
    Creates ceilings/roofs and floors
  - Copying heating load components
    Copy heating load components
  - Form intersection line roof - storey
    Forms the intersection line between roof or dormer and storey
  - Connecting roofs/dormers
    Connects roofs/dormers
  - Show roof height
    Displays the height of roofs and dormers
  - Display heating load/heating surface object
    Displays rooms, ventilation and air conditioning symbols and components as well as heating surfaces in the heating load/heating surface
  - Display overflows
    Displays overflows
  - Show 3D model
    Displays the 3D model
  - Reset heating load
    Resets the basic settings for all components and rooms for the next recording
  - Cross-trade
    - Show trade-dependent layer structure
      Displays the trade-dependent layer structure
    - Insert block
      Inserts a block into the drawing
    - Insert image
      Opens the dialogue for inserting an image
    - Open project editor
      Opens the project editor
    - Edit building data
      Edit building data
    - Create floor frame
      Creates a level frame
    - Create reference point
      Inserts reference points in floor frames
    - Machining heating load components
      Edit heating load components
    - Measure area and perimeter
      Measures the area and perimeter of objects or defined areas
    - Measure length
      Measures the distance between two points
    - Align user coordinate system
      Aligns the user coordinate system using two freely selectable points
    - Rotate user coordinate system to 0°
      Resets the rotation of the user coordinate system to 0°
    - Optimise drawing
      Optimises the drawing
    - Change of manufacturer
      Performs the change of manufacturer in the heating load trade
    - Delete marker
      Deletes the markers
    - Insert multiline text
      Inserts multiline text
  - View
  - Centre & Zoom
    Use Centre and Zoom to determine the zoom behaviour during individual command calls
- Heating surfaces
- Document

Change of manufacturer

Performs the change of manufacturer in the heating load trade

Button:

Command name: ChangeManufacturer

If you are sure you wish to change the manufacturer, confirm the following dialogue box by clicking Yes.
In the ‘Select Material Configuration’ dialogue box, select the material configuration and click OK.

The material configuration is now set for the ‘Heating Load’ trade and is displayed in the upper section of the building services toolbar.

Note:

Clicking on the manufacturer’s logo in the building services toolbar reopens the ‘Select Material Configuration ’ dialogue box. The material configuration that has already been set is highlighted in grey.