Home
Heating load/heating surfaces
Heating load
Show roof height
Displays the height of roofs and dormers

Heating load/heating surfaces
- Heating load
  - Display heating load / heating and cooling surface design
    Displays the heating load / heating and cooling surface design
  - Insert drawing reference
    Inserts a drawing reference
  - Tapping components
    Tapping various components in the drawing
  - Components
  - Set room symbol
    Sets a room symbol
  - Record room geometry
    Captures all components and symbols belonging to the heating load for a room geometry
  - Assign U-values
    Assigns a defined U-value to horizontal components
  - Create floors
    Create floors
  - Create ceilings/roofs
    Create ceilings/roofs
  - Creating ceilings/roofs and floors
    Creates ceilings/roofs and floors
  - Copying heating load components
    Copy heating load components
  - Form intersection line roof - storey
    Forms the intersection line between roof or dormer and storey
  - Connecting roofs/dormers
    Connects roofs/dormers
  - Show roof height
    Displays the height of roofs and dormers
  - Display heating load/heating surface object
    Displays rooms, ventilation and air conditioning symbols and components as well as heating surfaces in the heating load/heating surface
  - Display overflows
    Displays overflows
  - Show 3D model
    Displays the 3D model
  - Reset heating load
    Resets the basic settings for all components and rooms for the next recording
  - Cross-trade
  - View
  - Centre & Zoom
    Use Centre and Zoom to determine the zoom behaviour during individual command calls
- Heating surfaces
- Document

Show roof height

Displays the height of roofs and dormers

Button:

Command name: ShowRoofHeight

You can display the height of any point on the roof and dormer area.

Select a point on a dormer/roof surface.
A message window appears with the height in metres.
Exit the information dialogue with OK.

Note:
The command remains active until you have ended the command with ESC or the right mouse button. This allows you to determine several heights in succession.
End the command with ESC or the right mouse button.

You can find further information on our YouTube channel.

You can access the video here