Heating load/heating surfaces
- Heating load
  - Display heating load / heating and cooling surface design
    Displays the heating load / heating and cooling surface design
  - Insert drawing reference
    Inserts a drawing reference
  - Tapping components
    Tapping various components in the drawing
  - Components
    - Heating load calculation
      - Components in the heating load calculation
  - Set room symbol
    Sets a room symbol
  - Record room geometry
    Captures all components and symbols belonging to the heating load for a room geometry
  - Assign U-values
    Assigns a defined U-value to horizontal components
  - Create floors
    Create floors
  - Create ceilings/roofs
    Create ceilings/roofs
  - Creating ceilings/roofs and floors
    Creates ceilings/roofs and floors
  - Copying heating load components
    Copy heating load components
  - Form intersection line roof - storey
    Forms the intersection line between roof or dormer and storey
  - Connecting roofs/dormers
    Connects roofs/dormers
  - Show roof height
    Displays the height of roofs and dormers
  - Display heating load/heating surface object
    Displays rooms, ventilation and air conditioning symbols and components as well as heating surfaces in the heating load/heating surface
  - Display overflows
    Displays overflows
  - Show 3D model
    Displays the 3D model
  - Reset heating load
    Resets the basic settings for all components and rooms for the next recording
  - Cross-trade
  - View
  - Centre & Zoom
    Use Centre and Zoom to determine the zoom behaviour during individual command calls
- Heating surfaces
- Document

Components in the heating load calculation

Select the desired component from the component library.

Enter the search term in the search field of the component library.
Note:
The search responds to the first letter entered and provides corresponding suggestions. You therefore do not necessarily have to enter the entire search term to obtain the desired result.
Select the desired component by left-clicking on it.
Place the desired component in the drawing.
Make the required settings in the subsequent configuration dialogue for the inserted component.

Note:

The configuration dialogue of the inserted component is only displayed if you have activated the checkbox in the Open configuration dialogue automatically in the heating load area in the project and application settings. Alternatively, press the Shift key during placement.

You can find more information on our YouTube channel.

You can access the video here