Home
Drinking water
Simulate
Circulation simulation view
Log
The Log window displays the project log containing the key data for the project.

Drinking water
- Drawing
- Edit
- Calculate
- Simulate
  - Selecting the simulation object
    Accessing individual simulation objects
  - General
  - Circulation
  - Circulation simulation view
    - Messages
      Messages of different categories are displayed in the message window.
    - Sections (Circulation Simulation)
      The ‘Sub-sections’ window is a dynamic tabular overview of the sub-sections within a specific circulation loop.
    - Pipe network simulation
      The Pipe Network Simulation window displays the pressure losses or the flow rates in the circulation flow paths.
    - Temperature Profile (Circulation Simulation)
      The Temperature Profile window displays the temperature profile in the currently selected circulation circuit.
    - Temperature Profile of the Inliner (Circulation Simulation)
      The ‘Inliner Temperature Profile’ window displays the temperature profile within the inliner for the currently selected flow path.
    - Pressure Profile (Circulation Simulation)
      The Pressure Profile window displays the pressure profile in the currently selected flow path.
    - Dashboard (Circulation Simulation)
      The Dashboard (Simulation) window manages the simulation results.
    - Log
      The Log window displays the project log containing the key data for the project.
    - Performance curve (circulation simulation)
      The Characteristic Curve window displays the characteristic curves of a selected component in the drawingin the document.
    - Measurement points (circulation simulation)
      The Measurement Points (Simulation) window displays an overview of the measurement fittings included in the circulation circuit and the values to be set for them. The bidirectional link with the drawing and that the currently selected measuring fitting is displayed simultaneously in the drawing and in the table.
  - View of the water extraction simulation
  - Centre & Zoom
    Use Centre and Zoom to determine the zoom behaviour during individual command calls
- Analysis
- Labelling
- Document

Log

The Log window displays the project log containing the key data for the project.

The project log is displayed in the Log window. It shows the number of domestic hot water heaters, pumps, valves, thermal valves and the number of flow paths. It also lists the pipe sections with the maximum flow velocity and the minimum temperature, the longest flow path, the total heat losses, the total water volume and the total internal surface area of the pipework system. Right-clicking opens the context menu, through which you can access the ‘Clear contents’ function.

Note:

If you have selected a simulation object with thermal disinfection under ‘Simulation Object’, the parameters for thermal disinfection are displayed in the ‘Log’ window.