Home
Drinking water
Simulate
View
Measuring points (simulation)
The Measuring points (simulation) window shows an overview of the planned measuring fittings in the circulation circuit and their values to be set. The bidirectional link with the drawing ensures that the currently selected measuring fitting is displayed simultaneously in the drawing and in the table.

Drinking water
- Edit
- Calculate
- Analysis
- Simulate
  - Selection of simulation object
    Access to individual simulation objects
  - General
  - Circulation
  - Sinks
  - View
    - Messages
      Messages of different categories are displayed in the message window.
    - Sections (simulation)
      The Sections (Simulation) window is a dynamic tabular overview of the sections within a specific circulation circuit.
    - Pipe network simulation
      The pipe network simulation window shows the pressure losses or the volume flows in the circulation flow paths.
    - Temperature curve (simulation)
      Displays the temperature curve in the currently selected circulation circuit
    - Inliner temperature curve (simulation)
      Shows the temperature curve in the inliner in the currently selected flow path
    - Pressure curve (simulation)
      Displays the pressure curve in the currently selected flow path
    - Dashboard (Simulation)
      The Dashboard (Simulation) window manages the simulation results.
    - Output
      The simulation logs are displayed in the Output window.
    - Active component (simulation)
      The Active component (simulation) window displays either the pump characteristic curve of the selected pump or the characteristic curve of the selected valve.
    - Measuring points (simulation)
      The Measuring points (simulation) window shows an overview of the planned measuring fittings in the circulation circuit and their values to be set. The bidirectional link with the drawing ensures that the currently selected measuring fitting is displayed simultaneously in the drawing and in the table.
    - Flushing simulation
      The Flushing simulation window displays the overview of the flushing simulation.
    - Flushing log (simulation)
      Displays the flushing log
- Document

Measuring points (simulation)

The Measuring points (simulation) window shows an overview of the planned measuring fittings in the circulation circuit and their values to be set. The bidirectional link with the drawing ensures that the currently selected measuring fitting is displayed simultaneously in the drawing and in the table.

The Measuring points (simulation) window consists of a component filter and three columns with the details of the measuring fitting.

In the Designation column, the stored short designations (prefixes) from the design options are displayed.
The measured values column displays the temperatures or circulation volume flows that are set.
In the Range column, the set value range including the relative position of the value to be set is displayed for temperature measuring valves.
Tip:
To sort individual columns, click on the column headers in the table to sort the entries in the respective column in ascending or descending order.