Home
Appendix
Dialogues and additional information
Project and application settings
Cross-project application settings are defined in the project and application settings.
Updates
STUDIO allows you to make settings for the automatic search for programme updates in the Project and application settings dialogue.

Appendix
- Pipe network basics
- Dialogues and additional information
  - 3D view
    The 3D view window displays a 3D overview of the currently captured or calculated drawing. The bidirectional link with the drawing ensures that the currently selected object is always visible in the drawing and in the view window.
  - Wastewater lifting unit
    The component Wastewater lifting unit is used to integrate components that are drained via the wastewater lifting unit in the drawing.
  - Design options (waste water)
    Drawing-specific settings relating to your calculation are set in the Design options dialogue.
  - Design options (heating)
    Drawing-specific settings relating to your calculation are set in the Design options dialogue.
  - Design options (drinking water)
    Drawing-specific settings relating to your calculation are set in the Design options dialogue.
  - Construction stages
    You can divide a drawing into construction stages so that you can later create a material extract according to construction stages.
  - Component properties
    In the Edit and Calculate work perspective, your selection in the drawing is highlighted in colour. Section properties and component properties can be displayed and edited differently from the global project settings.
  - Component filter
    The component filter allows you to quickly filter the selected components in the drawing.
  - Edit labelling
    The predefined labelling features can be configured in the text field {Platzhalter} for features and constant text.
  - CAD-Performance Tool
    The CAD Performance Tool is a tool for the automated revision of plans to improve performance.
  - Drainage areas
    The Drainage areas window in the Drainage section is divided into two tabs.
  - Find function
    STUDIO has a parameterised search function that supports you when searching for drawn sections and components in the drawing, when selecting smart blocks to insert and when selecting products.
  - Heat load report
    With the preview of the calculation output, STUDIO supports you in customising the calculation output.
  - Hydraulics report
    With the preview of the calculation output, STUDIO supports you in customising the calculation output.
  - Types of ventilation in building drainage
  - Mass extract
    With the preview of the mass statement, STUDIO supports you in customising the printout of the masses.
  - Material Editor
    STUDIO ’s Material Editor helps you to calculate your quantities quickly and easily.
  - Diaphragm expansion vessel
    The drawing of a diaphragm expansion vessel is a prerequisite for its design.
  - Options Wizard (waste water)
    The options wizard guides you through the settings for the design.
  - Options assistant (heating)
    The options wizard guides you through the settings for the design.
  - Options Wizard (drinking water)
    The options wizard guides you through the settings for the design.
  - Starting the Plot Wizard
    Starts the plot wizard
  - Project data
    The Project data dialogue contains project information for the current project, for example for the project cover sheet or to determine the rainfall donations.
  - Product sequence or product selection
    In the Product sequence or Product selection dialogue, select the product sequence or a product for components.
  - Project data
    The Project data dialogue contains project information for the current project, for example for the project cover sheet or to determine the rainfall donations.
  - Project and application settings
    Cross-project application settings are defined in the project and application settings.
    - General
      In the General area under Calculations in the Project and application settings dialogue, you define settings for components.
    - Heating load
      In the Heating load area in the Project and application settings dialogue, you can make settings regarding the heating load in STUDIO.
    - Logos
      The Logos area in the Project and application settings dialogue allows you to adjust individual lines of your logo in the heating load printout by entering text.
    - Basic settings
      The basic settings in the Project and application settings dialogue contain file configurations for your drawing.
    - DenCAD (general)
      The DenCAD (general) area in the Project and application settings dialogue only refers to drawings that are neither defined as a line diagram nor as a floor plan. If you want to make settings for the line diagram or floor plan area, you must define the corresponding settings there.
    - Floor plan
      The settings defined in the Floor plan area in the Project and application settings dialogue only apply to drawings that are defined as floor plans.
    - String diagram
      The settings defined in the Line scheme area in the Project and application settings dialogue only apply to drawings that are defined as a line scheme.
    - Additional settings
      Advanced CAD settings are defined in the Additional settings area in the Project and application settings dialogue.
    - Updates
      STUDIO allows you to make settings for the automatic search for programme updates in the Project and application settings dialogue.
    - General
      The General section in the Project and application settings dialogue allows you to adjust the time interval for autosaving and the setting for displaying the product information.
    - Wizards
      The Wizards section in the Project and application settings dialogue allows you to make settings for using the Open project wizard.
    - User Interface
      In the User Interface section of the Project and Application Settings dialogue box, you can configure settings for the user interface controls.
    - Material
      In the Material section of the Project and application settings dialogue, you define cost adjustments that are taken into account when displaying costs in the mass extract.
    - Planner (project and application settings)
      The Planner area in the Project and application settings dialogue allows you to make entries for the project cover sheet.
    - Page layout
      The Page layout area in the Project and application settings dialogue allows you to configure the layout of your printouts.
    - Simulation
      The Simulation area in the Project and application settings dialogue allows you to set the animation time and the automatic simulation option.
  - Room-based drawing
    The Room-based drawing window in the Drinking water and waste water section allows you to configure and display all rooms and room combinations within the drawing.
  - Schematic Generator
    The Schematic Generator makes it possible to design a complete wiring diagram without any CAD experience. In a floor plan drawing, the Schematic Generator is not active.
  - Simulation
    The simulation is divided into a circulation simulation for hot and cold water and a water withdrawal simulation.
  - Section properties
    In the Edit and Calculate work perspective, your selection in the drawing is highlighted in colour. Section properties and component properties can be displayed and edited differently from the global project settings.
  - Insert drawing reference
    The Insert drawing reference function guides you through the settings for inserting a drawing reference.
  - Water softening system
    The drawing of a water softening system is a prerequisite for its design.
- Component Library Report
- Extended command reference

Updates

STUDIO allows you to make settings for the automatic search for programme updates in the Project and application settings dialogue.

Automatically check for updates: If the checkbox is activated, STUDIO automatically searches for programme updates when the application is started.
Update period in days: The time period entered specifies the intervals at which programme updates are checked for again.