Home
Appendix
Dialogues and additional information
Design options (waste water)
Drawing-specific settings relating to your calculation are set in the Design options dialogue.
Rainwater options (Wastewater design options)
In the Rainwater options section under Calculation, the calculation bases and properties for determining rainwater donation are defined.
Basis of calculation
On the Calculation bases tab in the Rainwater options area, properties are defined for determining the rainfall donations and the runoff coefficients for determining the rainwater runoff.
Create discharge coefficient
With New... to add a new discharge coefficient. This takes you to the Runoff coefficient dialogue.

Appendix
- Dialogues and additional information
  - Wastewater lifting unit
  - Design options (waste water)
    Drawing-specific settings relating to your calculation are set in the Design options dialogue.
    - Pipes/insulation (waste water design options)
      The Pipes/Insulation section under Recording allows you to customise individual definitions for each section type.
    - Pipe rows (waste water design options)
      The Pipe rows area under Recording provides an overview of individual pipe systems and enables individual adjustments to be made in the pipe system.
    - Manufacturer catalogues (design options for waste water)
      The links to the respective product sequence are defined by component category in the Manufacturer catalogues area under Entry. Prefixes for the labelling are also defined.
    - Wastewater utilisation types (Wastewater design options)
      The Usage types section under Recording allows you to select and manage individual usage types.
    - Rainwater options (Wastewater design options)
      In the Rainwater options section under Calculation, the calculation bases and properties for determining rainwater donation are defined.
      - Basis of calculation
        On the Calculation bases tab in the Rainwater options area, properties are defined for determining the rainfall donations and the runoff coefficients for determining the rainwater runoff.
        Create discharge coefficient
        With New... to add a new discharge coefficient. This takes you to the Runoff coefficient dialogue.
        Rename discharge coefficient
        With Rename... you can rename the discharge coefficients you have added. This takes you to the Discharge coefficient dialogue.
        Delete discharge coefficient
        With Delete... you can delete the discharge coefficients you have added.
        Edit discharge coefficient
        With Edit... you can adjust the discharge coefficients you have added. This takes you to the Discharge coefficient dialogue.
      - Determination of rain donations
        Properties for determining the rainfall donations are defined on the Rainfall Donation Determination tab in the Rainwater Options area.
    - Gravity drainage (wastewater design options)
      In the Calculation options area under Calculation, media-specific settings for the individual section types, global settings for the filling level and backflow level as well as for pressure drainage are defined.
    - General (Waste water design options)
      In the General section under Material, you define whether pre-wall elements and fittings from the drinking water trade should be taken into account in the mass determination.
    - Component properties (Waste water design options)
      In the component properties area under Material, settings for determining the material for the pre-wall elements are specified.
  - Design options (heating)
    Drawing-specific settings relating to your calculation are set in the Design options dialogue.
  - Design options (drinking water)
    Drawing-specific settings relating to your calculation are set in the Design options dialogue.
  - Construction stages
    You can divide a drawing into construction stages so that you can later create a material extract according to construction stages.
  - Component properties
    In the Edit and Calculate work perspective, your selection in the drawing is highlighted in colour. Section properties and component properties can be displayed and edited differently from the global project settings.
  - Component filter
    The component filter allows you to quickly filter the selected components in the drawing.
  - Drainage areas
    The Drainage areas window in the Drainage section is divided into two tabs.
  - Find function
    CALHYDRA has a parameterised search function that supports you when searching for drawn sections and components in the drawing and when selecting products.
  - Hydraulics report
    With the preview of the calculation output, CALHYDRA supports you in customising the calculation output.
  - Mass extract
    With the preview of the mass statement, CALHYDRA supports you in customising the printout of the masses.
  - Material editor
    With the material editor, CALHYDRA supports you with convenient and fast determination of your dimensions.
  - Diaphragm expansion vessel
  - Options Wizard (waste water)
    The options wizard guides you through the settings for the design.
  - Options assistant (heating)
    The options wizard guides you through the settings for the design.
  - Options Wizard (drinking water)
    The options wizard guides you through the settings for the design.
  - Project data
    The Project data dialogue contains project information for the current project, for example for the project cover sheet or to determine the rainfall donations.
  - Product sequence or product selection
    In the Product sequence or Product selection dialogue, select the product sequence or a product for components.
  - Project data
    The Project data dialogue contains project information for the current project, for example for the project cover sheet or to determine the rainfall donations.
  - Simulation
    The simulation is divided into a circulation simulation for hot and cold water and a simulation of a cold water hygiene system.
  - Section properties
    In the Edit and Calculate work perspective, your selection in the drawing is highlighted in colour. Section properties and component properties can be displayed and edited differently from the global project settings.
  - Insert drawing reference
    The Insert drawing reference function guides you through the settings for inserting a drawing reference.
  - Water softening system

Create discharge coefficient

With New... to add a new discharge coefficient. This takes you to the Runoff coefficient dialogue.

Enter the name for the type of area to which the runoff coefficient should apply in the Runoff coefficient dialogue.
Enter the peak discharge value Cs in the Discharge coefficient dialogue.
The value entered here must be between 0.1 and 1.0.
Click Ok to confirm your entry and exit the Discharge coefficient dialogue.
The new discharge coefficient is created.