Home
Appendix
Dialogues and additional information
Design options (waste water)
Drawing-specific settings relating to your calculation are set in the Design options dialogue.
Component properties (Waste water design options)
In the component properties area under Material, settings for determining the material for the pre-wall elements are specified.

Appendix
- Dialogues and additional information
  - Wastewater lifting unit
  - Design options (waste water)
    Drawing-specific settings relating to your calculation are set in the Design options dialogue.
    - Pipes/insulation (waste water design options)
      The Pipes/Insulation section under Recording allows you to customise individual definitions for each section type.
    - Pipe rows (waste water design options)
      The Pipe rows area under Recording provides an overview of individual pipe systems and enables individual adjustments to be made in the pipe system.
    - Manufacturer catalogues (design options for waste water)
      The links to the respective product sequence are defined by component category in the Manufacturer catalogues area under Entry. Prefixes for the labelling are also defined.
    - Wastewater utilisation types (Wastewater design options)
      The Usage types section under Recording allows you to select and manage individual usage types.
    - Rainwater options (Wastewater design options)
      In the Rainwater options section under Calculation, the calculation bases and properties for determining rainwater donation are defined.
    - Gravity drainage (wastewater design options)
      In the Calculation options area under Calculation, media-specific settings for the individual section types, global settings for the filling level and backflow level as well as for pressure drainage are defined.
    - General (Waste water design options)
      In the General section under Material, you define whether pre-wall elements and fittings from the drinking water trade should be taken into account in the mass determination.
    - Component properties (Waste water design options)
      In the component properties area under Material, settings for determining the material for the pre-wall elements are specified.
  - Design options (heating)
    Drawing-specific settings relating to your calculation are set in the Design options dialogue.
  - Design options (drinking water)
    Drawing-specific settings relating to your calculation are set in the Design options dialogue.
  - Construction stages
    You can divide a drawing into construction stages so that you can later create a material extract according to construction stages.
  - Component properties
    In the Edit and Calculate work perspective, your selection in the drawing is highlighted in colour. Section properties and component properties can be displayed and edited differently from the global project settings.
  - Component filter
    The component filter allows you to quickly filter the selected components in the drawing.
  - Drainage areas
    The Drainage areas window in the Drainage section is divided into two tabs.
  - Find function
    CALHYDRA has a parameterised search function that supports you when searching for drawn sections and components in the drawing and when selecting products.
  - Hydraulics report
    With the preview of the calculation output, CALHYDRA supports you in customising the calculation output.
  - Mass extract
    With the preview of the mass statement, CALHYDRA supports you in customising the printout of the masses.
  - Material editor
    With the material editor, CALHYDRA supports you with convenient and fast determination of your dimensions.
  - Diaphragm expansion vessel
  - Options Wizard (waste water)
    The options wizard guides you through the settings for the design.
  - Options assistant (heating)
    The options wizard guides you through the settings for the design.
  - Options Wizard (drinking water)
    The options wizard guides you through the settings for the design.
  - Project data
    The Project data dialogue contains project information for the current project, for example for the project cover sheet or to determine the rainfall donations.
  - Product sequence or product selection
    In the Product sequence or Product selection dialogue, select the product sequence or a product for components.
  - Project data
    The Project data dialogue contains project information for the current project, for example for the project cover sheet or to determine the rainfall donations.
  - Simulation
    The simulation is divided into a circulation simulation for hot and cold water and a simulation of a cold water hygiene system.
  - Section properties
    In the Edit and Calculate work perspective, your selection in the drawing is highlighted in colour. Section properties and component properties can be displayed and edited differently from the global project settings.
  - Insert drawing reference
    The Insert drawing reference function guides you through the settings for inserting a drawing reference.
  - Water softening system

Component properties (Waste water design options)

In the component properties area under Material, settings for determining the material for the pre-wall elements are specified.

In the Equipment pattern drop-down menu, select the equipment pattern.

Note:

If you select "Neutral", the removal fittings are displayed in the material extract. If you have selected "None", the tapping fittings are not listed in the material extract.

In the Pre-wall system drop-down menu, select the pre-wall system to be used.

If you have deactivated the Material extract with overmeasured lengths checkbox, the fitting lengths are also taken into account when determining the material in order to ensure that the material is determined as accurately as possible. Otherwise, the fitting lengths are not taken into account when determining the material and are added to the lengths of the section.

You can find more information on our YouTube channel.

You can access the video here