In the ‘Drinking Water Heating’ dialogue box, you can adjust individual calculation properties for the KTS fresh water station and its installation dimensions.
Fresh Water Station section
-
From the ‘Product’ drop-down menu, select the desired product for the fresh water station.
Note: If you have selected the ‘Calculating...’ option, a suitable product will be determined automatically.
-
In the ‘Maximum number’ drop-down menu, select the maximum number of KTS fresh water stations to be used.
Note: You can only select the maximum number if you have selected ‘is being calculated... ’ under ‘Product ’.
-
In the ‘Minimum number’ drop-down menu, select the minimum number of KTS fresh water stations to be used.
Note: You can only select the minimum number if you have selected ‘To be calculated... ’ under ‘Product ’.
-
In the ‘Permissible pressure drop ’ input field, enter the maximum permissible pressure drop at peak flow rate in accordance with DIN 1988-300.
-
From the ‘Electrical Conductivity’ drop-down menu , select the material of the plate heat exchanger to be used.
Note: If the option < 500 CU is selected, the water quality must be checked to ensure it is suitable for a copper-brazed plate heat exchanger.
Note: For further information on the application limits of the respective materials, click on the ‘
’ button.
Note: You can only select the material of the plate heat exchanger to be used if you have selected the entry ‘is being calculated...’ under ‘Product ’.
-
Tick the ‘BACnet connection’ checkbox if the fresh water stations are to be connected via BACnet.
Installation Dimensions section
-
By activating the Check installation dimensions checkbox, you can specify the installation surfaces for checking.
-
Enter the installation area in metres in the ‘Installation area length l’ input fieldTB.
-
Enter the installation area width bTB in the ‘Installation area width b’ input field in metres.
Confirm details
-
Exit the ‘Drinking Water Heating ’ dialogue box by clicking ‘OK’.
