Home
KTS design module
The KTS design module enables you to dimension the KTS thermal system, a centralised DHW heating system based on the flow-through principle. It only takes three steps to achieve the result, including documentation of the results.
Result
The third and final step, Results, provides you with comprehensive results documentation.
ThermoTank
The ThermoTank tab displays the properties of the ThermoTank determined.

KTS design module
The KTS design module enables you to dimension the KTS thermal system, a centralised DHW heating system based on the flow-through principle. It only takes three steps to achieve the result, including documentation of the results.
- Determining requirements
  In the first step, demand determination, you define the specific demand for your planning using demand profiles or by specifying manual tapping processes.
- Interim result
  In the second step, ‘Interim result’, a combination of results is determined on the basis of the requirements profiles and the calculation parameters.
- Result
  The third and final step, Results, provides you with comprehensive results documentation.
  - Totals line
    In addition to the calculation results for outputs and volume flows, the Totals line tab shows the totals line including a diagram for an overview of the hot water consumption in m³/h.
  - Principle sketch
    The Principle sketch tab shows a schematic overview of the entire design.
  - Pump characteristic curve
    The Pump curve tab displays the design results for the pump.
  - ThermoTank
    The ThermoTank tab displays the properties of the ThermoTank determined.
  - Calculation results
    The Calculation Results tab displays the design results for the secondary circuit, primary circuit and heating circuit.
  - Documentation
    The Documentation tab provides various result outputs.

ThermoTank

The ThermoTank tab displays the properties of the ThermoTank determined.

ThermoTank properties area
- Total volume of the ThermoTank in litres
- Volume required in litres
- Switching hysteresis volume in litres
- Return buffer volume in litres
- Dished bottom volume in litres
- Sensor spacing T02-T04 in millimetres
- Sensor spacing T02-T05 in millimetres
- Overall height in millimetres
- Tilting dimension in millimetres
- Diameter in millimetres
Range Arrangement of the temperature sensors
- Schematic diagram of the structure of the thermotank including geometries