Home
KTS design module
The KTS design module enables you to dimension the KTS thermal system, a centralised DHW heating system based on the flow-through principle. It only takes three steps to achieve the result, including documentation of the results.
Determining requirements
In the first step, demand determination, you define the specific demand for your planning using demand profiles or by specifying manual tapping processes.
Demand profile according to DIN 4708
You can use a demand profile in accordance with DIN 4708 to create a demand profile based on a demand index and the specification of the peak demand.
Determine requirements key figure
In the Determine requirement code dialogue, you can have the unknown requirement code for flat groups determined.

KTS design module
The KTS design module enables you to dimension the KTS thermal system, a centralised DHW heating system based on the flow-through principle. It only takes three steps to achieve the result, including documentation of the results.
- Determining requirements
  In the first step, demand determination, you define the specific demand for your planning using demand profiles or by specifying manual tapping processes.
  - Demand profile by reference object
    With a demand profile by reference object, you can add a demand profile to your planning based on a predefined building type, a predefined value range for the reference value and a predefined value range for the specific demand. The key figures provided are based on actual measurements in the respective reference objects.
  - Special profile
    With a special profile, you can create a demand profile based on a predefined building type, a predefined value range for the reference value and a predefined value range for the specific demand. The key figures provided are based on actual measurements in the respective reference objects.
  - Demand profile according to DIN 4708
    You can use a demand profile in accordance with DIN 4708 to create a demand profile based on a demand index and the specification of the peak demand.
    - Determine requirements key figure
      In the Determine requirement code dialogue, you can have the unknown requirement code for flat groups determined.
  - Dispensing processes
    With manually created dispensing processes, you create a circulation profile on the basis of created dispensing processes.
  - Circulation volume flow
    You create a circulation profile using a manually created circulation volume flow.
- Interim result
  In the second step, ‘Interim result’, a combination of results is determined on the basis of the requirements profiles and the calculation parameters.
- Result
  The third and final step, Results, provides you with comprehensive results documentation.

Determine requirements key figure

In the Determine requirement code dialogue, you can have the unknown requirement code for flat groups determined.

Adding flats and taps

Add a new flat by clicking on the Add flat no. 1 button.

Note:
You can create as many flats as you like. A tapping point to be taken into account is automatically created for the first flat.
Enter the number of rooms r in the apartment group in column 2 of the upper table.
In the upper table in column 2 Remarks flat, enter remarks about the flat.
In the lower table, enter the abbreviation of the tapping fitting in column 3 Abbreviation.
In the upper table in column 2 Remarks tap, enter remarks on the tap.
The demand code is displayed in the bottom right-hand dialogue area.
If required, click on the Add flat no.... button to add another flat.
If required, click on the Add tapping point no.:... button to add further tapping points. button to add further taps.

Removing flat groups and taps

Click on the Remove flat no. 1 button to remove the created flat and tapping point 1.

CAUTION:
There is no further prompt to remove the flat. After calling up the Remove flat no. 1 function, the flat cannot be restored.
If required, remove further flats using the Remove flat no.:.... button
If required, remove further taps using the Remove tap no.:.... button

CAUTION:
There is no further prompt to remove the tapping point. After calling up the function Remove tapping point no.:... the dispensing point cannot be restored.

Checking the entries

Check the entries you have made and exit the dialogue with Ok.
The calculated demand index is entered in the dialogue Demand profile according to DIN 4708.