Home
Waste water
Calculate
View
Filling ratio
The Filling level window in the waste water section shows the filling ratio of the selected section.

Waste water
- Edit
- Calculate
  - Show options wizard
    Displays the wizard for the design options
  - Show options
    Displays the design options
  - Recalculate
    Displays the calculation status of the drawing
  - Messages
    Display of the message status
  - Edit data
  - View
    - Messages
      Messages of different categories are displayed in the message window.
    - Component properties
      Calls up the component properties
    - Section properties
    - Product information
      The Product information window shows product details for the selected component or selected section in the drawing.
    - Section components
      The section components window in the drinking water, heating and waste water trades shows the components and fittings within a section for a positive-locking pipe system.
    - Sections
      The Sections window is a dynamic tabular overview of all the sections within the drawing.
    - Characteristic curve
      The Characteristic curve window displays the characteristic curve including the operating points of a valve or appliance.
    - Nominal diameter distribution
      The Nominal diameter distribution window shows the pipe length depending on the nominal diameter.
    - Flow path data sheet (waste water)
      The flow path data sheet in the heating trade provides brief information on the hydraulic conditions in the flow path.
    - Drainage areas
      The Drainage areas window in the Drainage section is divided into two tabs.
    - Setting list
      The Settings list window in the Heating section provides brief information on the setting values of the valves.
    - Discharge volume flows
      The Drainage volume flows window in the wastewater section provides brief information on the volume flows in the selected section.
    - Filling ratio
      The Filling level window in the waste water section shows the filling ratio of the selected section.
- Analysis
- Document

Filling ratio

The Filling level window in the waste water section shows the filling ratio of the selected section.

The maximum permissible filling level and the minimum filling level are displayed in %. The display is in the layer colour of the respective section.

Note:

The maximum permissible filling ratio and the minimum filling ratio can be configured in the design options.