Global valve settings
Displays global valve settings
Button: 
Command name: SimulationGlobalValveAdjustment
Select one of the three settings in the Global Valve Setting dialogue box.
- Select the ‘Set Valve’ option to choose an available valve type from the drop-down list. You must also specify a valid valve setting value.
- Select the option ‘Adjust thermal valves to calculation’ (not recommended) to attempt to set the valves so that the valve characteristic curve of the thermal valves passes through an ideal point. If this is not possible, the setting chosen will at least be the one where the characteristic curve runs as close as possible to this point. Note:An ideal Kv value is calculated for the valves. For thermal valves, this ideal value usually does not lie on the valve characteristic curve and therefore cannot be achieved by the valve.
- Select the ‘Reset valves’ option to reset the valves selected from the drop-down menu to their calculation settings. You can choose between the settings ‘Reset all valves’, ‘Reset static valves’ or ‘Reset thermal valves’.
